Someone told you the wiring needs to come out. Or the panel has to be replaced before anything else can happen. Before you agree to a large job, it is worth a call to hear what the work actually involves and whether the scope matches the problem. We scope every job on the phone, explain what we find, and give you a plain answer on repair versus upgrade. That is what the call is for.
We handle residential and commercial electrical work throughout Carrboro and the surrounding area. Homeowners dealing with a wiring concern, landlords managing a rental that needs attention before a new tenancy, and business owners who cannot afford a circuit going down during the week all reach the same number. We are available seven days a week, from 6:00 AM to 8:00 PM.
Not every electrical problem can wait for a convenient window. When a circuit fails in a rented unit or a breaker goes out in a commercial space, the pressure to get it handled quickly is real. We take short-notice calls and work around schedules that cannot flex much. That means talking through the timing on the call so the visit fits what the property actually allows.
For tenants who need to stay home and businesses that have to stay open, the approach is the same: we confirm what needs to be accessed, what can stay live, and what the work will require before the visit is booked. No one shows up expecting access they were not told about.
If a job turns out to need more than one visit, that gets explained on the first call, not after the first visit is done. You know what to expect before anything is scheduled.
A breaker that trips, an outlet that stops working, or a partial power loss to part of the house usually points to something on the customer's side of the meter. That is the work we handle: tracing the fault, finding the cause, and fixing it. GFCI and AFCI protection is checked in the affected areas as part of any visit that touches those circuits, because a fault in one place sometimes reveals a gap in protection somewhere nearby.
Some symptoms sit right at the boundary. A service-entrance or meter problem, a voltage issue that affects the whole house, or a loss of power that the panel cannot explain on its own may point to the utility's equipment rather than ours. We work out where the fault sits before recommending any repair. If the problem turns out to be on the utility's side, we tell you that clearly and explain what the next step looks like, including who to contact and what to ask for. A breaker that keeps tripping is a warning worth heeding, and so is a symptom that does not behave the way a simple circuit fault should.
The price is confirmed on the call, before anything is scheduled. What moves a quote is what the fault actually turns out to be, what has to be opened up to reach it, and whether the existing panel or circuit can carry the change being asked of it. A load calculation is part of any job that adds a significant draw to the system, because the panel has to be able to handle what is being added before the circuit is run.
You get a straight answer about the work before it is scheduled. That applies to a single outlet and to a full rewire alike. If the job is more involved than the call suggested, that conversation happens before additional work is done, not after the invoice is written.
Call (919) 241-5635 to get a quote and find out what the work involves at your address.
The housing in a town this size tends to mix older in-town properties with more recent construction, and the electrical work those buildings generate is different from what a newer suburb produces. Older homes may have knob-and-tube wiring that was never replaced, aluminum branch-circuit wiring that needs remediation at every connection point, or panels that were sized for a much lighter load than the house now carries. Newer construction brings its own demands: EV charger circuits, home office loads, and additions that push a panel toward its limit.
Knob-and-tube wiring is not compatible with modern insulation, and it was not designed for the loads a home runs today. Aluminum wiring from the 1960s and 1970s requires specific handling at connection points to prevent overheating. Where the existing wiring cannot safely carry what the home needs, a partial or full rewire is the right answer. We assess what is there and explain the scope before quoting anything.
A Level 2 charger needs a dedicated 240-volt circuit and a panel with enough available capacity to feed it. Welders, compressors, and heavy workshop equipment have the same requirement. We run the load calculation, confirm what the panel can carry, and run the circuit from there. Where the panel does not have room, that conversation happens before the circuit is quoted, not after the work starts.
Running power to a detached structure involves its own set of considerations: the route from the main panel, whether the run is overhead or underground, and whether the subpanel at the other end is sized for what the space will actually use. Electric gate operators need a dedicated circuit and proper grounding. We scope these jobs on the call so the visit is planned before anyone arrives.
Battery-operated detectors are common, but hardwired alarms with battery backup are a more reliable setup, particularly in older homes where the detector placement may not match the current floor plan. Interconnected hardwired alarms are a practical upgrade in multi-room or multi-story properties. We handle the wiring and confirm the placement covers what the layout requires.
A ceiling fan in a room that was not wired for one needs either a new circuit or confirmation that the existing lighting circuit can carry the additional load, along with a fan-rated box in the ceiling. We check both before installation so the result is safe and code-compliant. The same applies to any circuit addition: the existing system is assessed before new wiring is run.
In a town with a meaningful share of older housing stock, panels turn up in places that newer construction would not put them: inside a closet, in a utility room off the kitchen, in a crawl space, or in a detached structure that was wired separately from the main house. Knowing where the panel is and whether access is straightforward helps us plan the visit accurately. If access is limited or unusual, mention it on the call.
Clear access to the panel is the most important thing. If the work involves specific outlets, switches, or fixtures, having the area around them accessible before the visit saves time. Knowing when the symptom started and whether anything changed around the same time, such as a new appliance or a recent storm, helps us narrow the cause on the call. The work area is left as it was found before the visit ends. Anything not covered here is on the electrical services page.
We cover Carrboro and the surrounding communities throughout Orange County and nearby. That includes Chapel Hill, Carolina Meadows, Governors Village, Governors Club, and Briar Chapel. If you are in one of these areas or nearby, call and we will confirm whether we cover your address.
Coverage runs seven days a week, from 6:00 AM to 8:00 PM, for everything from a single outlet repair to a panel upgrade or a full rewiring project.
We discuss the operational requirements on the call and plan the work around the areas that can be taken offline without affecting the rest of the space. In some cases, work is scheduled outside business hours. We confirm what the schedule allows and what the disruption looks like before anything is booked.
Yes. Buyers, agents, and prospective owners can schedule an inspection before a sale closes. The inspection covers the same ground regardless of who books it: the panel, the wiring, the grounding, and the outlets throughout the property.
Call us at (919) 241-5635 to arrange it.
Someone who can provide access to the panel and the areas being worked on needs to be present. That can be the tenant, the landlord, or a property manager. If the work requires decisions to be made on site, the person present should have the authority to make them. We work out the access arrangement on the call before the visit is scheduled.
A wall oven and a cooktop each typically require their own dedicated 240-volt circuit, sized to the appliance's draw. Running them on a shared circuit is not standard practice and can create a load problem. We confirm the appliance specifications before running the circuits so each one is sized correctly.
Older properties in this area tend to have wiring that has not kept pace with modern loads: knob-and-tube that was never replaced, aluminum branch-circuit wiring that needs attention at connection points, or panels that were sized for far less than the house now draws. GFCI and AFCI protection is also frequently absent in areas where it is now required. A call is the right starting point if you are not sure what you have.
An electrical safety inspection before a tenancy covers the panel, the wiring condition, outlet and switch function, and whether GFCI protection is in place in the locations that require it. It gives you a clear picture of what is working and what needs attention before the property is occupied.
Call (919) 241-5635 to find out what the inspection involves and to get a price before anything is scheduled.
Tying a new addition into the existing electrical supply means running circuits from the main panel to the new space and confirming the panel has enough capacity to carry the additional load. If the panel is already near capacity, a service upgrade or a subpanel may be part of the conversation. We assess the existing supply as part of scoping any addition work.
Older properties often have wiring from multiple eras, and each type has its own characteristics. We assess what is present, identify where the different wiring types meet, and explain what each section involves before quoting any work. The approach depends on the condition of each section and what the property needs to support safely.
A partial rewire affects the circuits and areas being worked on, and those circuits will be without power during the work. The disruption is limited to the areas involved rather than the whole property. The duration depends on how much wiring is being replaced and the access conditions. We give you a realistic estimate of the time involved on the call.
Call (919) 241-5635 and tell us what you are seeing.
We will ask about the symptom, where it is happening, and what the property looks like. By the end of the call, you will know what the work is likely to involve, what it will cost, and when we can get to you. We are available every day from 6:00 AM to 8:00 PM.
See our service area. Also serving the towns around: Chapel Hill, Morrisville, Cary, Fuquay-Varina.
Below is a quick reference for the electrical work we handle across Carrboro and Orange County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If you do not see your situation here, call us and we will scope it on the phone.
| Electrical Service | What's Included | Common Situations | Things to Know |
|---|---|---|---|
| Outlet & Switch Installation | GFCI outlet installation, Tamper-resistant receptacles, Dimmer and smart-switch wiring, USB-integrated outlets | Homeowners updating older outlets or adding convenience receptacles in kitchens, baths, or garages | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. Older homes often lack it in one or more of those locations. |
| Wiring & Circuit Installation | New circuit runs, Circuit extensions for additions, AFCI breaker installation, Grounding and bonding | Remodels, additions, and any project that needs new wiring run from the panel | AFCI protection is required on bedroom and living-area circuits in new wiring work. We include it where the circuit calls for it. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Load calculations, Panel replacement, Subpanel installation | Homes adding EV chargers, large appliances, or a major addition that the existing panel cannot support | Panel upgrades in Carrboro commonly require a permit and inspection. We confirm what applies at your address before scheduling. |
Call (919) 241-5635 to talk through your electrical situation and get a quote before anything is scheduled.
(919) 241-5635